One goose… No, two! for better galloping

Jellymodels has produced two versions of a Gallopin' Goose for enhancing our H0-9 layouts.

François Fontana

DOSSIER The kit is incredibly simple: a few 3D printed parts, two axles with spoked wheels, to be fitted over an N scale driving chassis with two bogies from the Kato range or a 4-wheeler one produced by Tomytec. Depending on the length of the body, you will choose one or the other. Assembling the model, whose engraving is fairly deep, calls mostly on a few small screws, supplied with the kit. The only parts that need to be glued in place onto the roof of the carriage part are the fuel tank and the exhaust silencer. The kit comes with a sheet of very clear and neatly illustrated instructions. PREPARATION Like all 3D printed models, the parts must be carefully degreased. Brush them under hot water, with a drop…

You're reading a preview of

Voie Libre International (Digital) - 1 Issue, JANUARY / FEBRUARY / MARCH 2024 - 116

DiscountMags is a licensed distributor (not a publisher) of the above content and Publication through Zinio LLC. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered on our website, are those of the respective author(s) or publisher(s) and not of DiscountMags. DiscountMags does not guarantee the accuracy, completeness, truthfulness, or usefulness of all or any portion of any publication or any services or offers made by third parties, nor will we be liable for any loss or damage caused by your reliance on information contained in any Publication, or your use of services offered, or your acceptance of any offers made through the Service or the Publications. For content removal requests, please contact Zinio.