SERVICE YOUR CRANKBROTHERS MALLET PEDALS

Fix the squeaking and play in your Crankbrothers Mallet or Candy pedals before they wear out and they’ll last you a long time.

20 mins £20 for Crankbrothers pedal refresh kit ✓ Allen keys ✓ T25 Torx key ✓ Sockets ✓ Hammer ✓ Fine screwdriver ✓ Stanley knife ✓ Rags ✓ Grease 1 SLIDE OUT THE SPINDLE Use a 6mm Allen key to unscrew the end cap on the outboard edge of the pedal. With an 8mm Allen key inserted into the spindle, use an 8mm socket to turn the nut inside the pedal body anticlockwise. Remove the nut and slide the spindle out of the pedal. manufacturers recommend not doing so. 2 DECONSTRUCT THE PEDAL With a T25 Torx key, remove the two bolts in the holes in the pedal body. Pull the pedal body apart, slide a Stanley knife under the plastic bushes that sit on the inside of the two…

You're reading a preview of

Bike Repair and Maintenance (Digital) - 1 Issue, Bike Repair and Maintenance 2020

DiscountMags is a licensed distributor (not a publisher) of the above content and Publication through Zinio LLC. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered on our website, are those of the respective author(s) or publisher(s) and not of DiscountMags. DiscountMags does not guarantee the accuracy, completeness, truthfulness, or usefulness of all or any portion of any publication or any services or offers made by third parties, nor will we be liable for any loss or damage caused by your reliance on information contained in any Publication, or your use of services offered, or your acceptance of any offers made through the Service or the Publications. For content removal requests, please contact Zinio.